Heavy Duty Samson db1800a 18 Active PA Subwoofer DJ Disco, Sub Bass. This is a proper heavy duty ply constructed speaker made by an American company SAMSON electronics who's systems are designed for commercial use. I've had a few active subs before that have been overrated with allegedly high power amps but don't be fooled this sub features an old school never let you down amplifier rated at an old school 500w rms and on half settings supplies ample low end.
It's got external cooling fins and a internal old School transformer the whole thing weighs a beefy 80lbs it even has wheels mounted. Can be used as it is or option of internal crossover to control a split signal to your mid & top amp & speakers. See below link for user manual. Dimensions (H x W x D).................... 500 Watts RMS 1000 Watts Peak.Balanced, high-passed tracking low frequency crossover point. Selects stereo or mono low frequency operation. Plywood, carpet covered Black carpet.
Three Inch, Heavy Duty Integral 1 3/8? 570mm x 681 mm x 665mm. The dB1800a is a self-powered subwoofer featuring an.
18 heavy duty driver, complemented by a 500 Watt power amplifier. The dB1800a also offers an active stereo cross- over providing a high-passed output for running your satellite speakers.Solid 3/4 inch plywood construction, steel corners, tough carpet covering and larger casters make the dB1800a a road warrior. In fixed installation systems, the dB1800a provides super tight low frequency output in a relatively small, unobtrusive enclosure. The dB1800a is a perfect add-on to your dB500 and Expedition system, or for any sound rein- forcement system where extended low-end is desired. While using your dB1800a, you'll have great low-end anywhere. > Heavy-duty, 18 inch Low Frequency Transducer With Butyl Rubber Surround.
> Built-in 500 Watt Power Amplifier. > Balanced High Pass Outputs for Satellite Speakers. > Variable Crossover 30 - 200 Hz.
> Stereo / Mono Operation Switch. > Heavy-Duty, Rear Mounted Casters.> Extra Large Grab Handles. > 35mm Pole Mount Receptacle.
> 3/4 Plywood Construction, internally braced and covered in tough carpet. ARCHITECT'S & ENGINEER'S SPECIFICATIONS.The DB1800A shall be a wooden subwoofer cabinet to. Be used as a FOH subwoofer. It shall be black and have metal mesh grills. It shall have a 500 watt class G power amplifier. It shall have a 18 inch woofer for low frequencies. The DB1800A shall have 2 XLR balanced line inputs with level control and frequency sweep control for the crossover. The DB1800A shall have an amplifier clip and protection LED indicator. The DB1800A shall also have a mono/stereo switch. A standard IEC connector and cable will be supplied for connection to AC power sources. This item is in the category "Musical Instruments & DJ Equipment\DJ Equipment\Speakers & Monitors". The seller is "slipstream_blue" and is located in this country: GB. This item can be shipped to United Kingdom.