1x Speaker Stand Carry Bag. The Alto TS315 is the flagship speaker of the new Alto TS3 series of active powered PA speakers. Featuring a 15" woofer and 1.4" tweeter this professional speaker will deliver in any application you'll need it for. Best suited for clubs, bars, mobile DJ's and conference halls, the Alto TS315 is a versatile and powerful speaker that delivers excellent sound. The all-new Alto Professional TS3 Series of professional loudspeakers deliver solutions for every performance and installation challenge.
With 2000 watts of explosive bi-amplified power and newly-designed transducers, these speaker systems deliver truly high-performance audio, without compromise or restriction. Their elegant industrial design, lightweight but rugged construction, versatile mounting/placement application and intuitive user interface achieves a level of excellence and refinement that exceeds expectations. 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF).15-inch (381 mm) LF driver, 3-inch (76 mm) high-temperature voice coil. 1.4-inch (35 mm) neodymium magnet HF driver with precision wave guide. Pole-mountable, wedge monitor, bracket installation or flown application with integral M10 suspension points. Integrated 2-channel mixer with dual XLR ¼-inch combo mic/line inputs, independent level controls, XLR Link output, Contour. EQ switch and Ground-Lift switch. Custom engineered high-efficiency class D amplifiers with passive cooling design No fan means the speaker runs cleaner, quieter and has greater long-term reliability. Design Origin: Designed and tuned in the USA. Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF). LF Driver: 15-inch (381 mm) LF driver, 3-inch (76 mm) high-temperature voice coil. HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision wave guide. Frequency Response: 5020 kHz (+/- 3 dB). Frequency Range: 43 Hz22 kHz (-10 dB). Horn Coverage: 90° H x 60° V nominal. Equalization: Contour Switch Low and High Frequency +3dB Boost.
Connectors: (2) XLR/TRS ¼ (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input. Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch. Indicators: 2 x Power LED (front and rear), Clip limiter LED. Protection: Electronic clip, Thermal and transducer overdrive protection.
Power Connection: IEC with Mains Fuse. AC Voltage Input: 100,110-120,220240 V, 50/60 Hz. Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille. Mounting/Installation: 36 mm standard pole mount, Wall or ceiling mount using TSB125 bracket, Flown application with integral.M10 suspension points, Wedge monitor. Dimensions (HxWxD): 25.7 x 16.6 x 15.4 / 652mm x 421mm x 392mm. Net Weight: 41.3 lbs. Introducing the Alto TS318S Subwoofer.
The biggest of three, this 18 sub is part of Alto's latest range of subs designed to complement their popular TS3 PA speakers that are highly regarded amongst performing DJs and musicians alike. Whether you're the proud owner of some of these speakers or whether you have a completely different brand this magnificent sub will still give you smooth and powerful bass.As with the TS312S and the TS315S the TS318S comes equipped with six selectable DSP output modes for seamless blending into any live speaker set up, plus its long-excursion 18 woofer will deliver virtually distortion-free LF audio thanks to its dense wood, braced ported enclosure. Add a Rock-Solid Foundation to Your Music There are times when your sound system needs additional low-frequency output and "punch". For those situations, Alto Professional proudly offers the TS318 powered subwoofer.
This subwoofer extends the bass response of virtually any fullrange speaker, relieving that speaker of the difficult task of having to reproduce the low bass frequencies. A system with stunning wide-range response characterised by dramatic, impactful low frequencies and effortless, undistorted mids and highs.The listening audience will hear everything with perfect clarity, from the lowest bass synth tones to the highest percussion bells and everything in between. Premium Components TS318S features a rugged, long-excursion woofer mounted in a solidly-braced ported enclosure, computer-optimised for powerful low-frequency performance. The enclosure itself is made from a dense wood composite. This strong, resonant-free material has virtually perfect acoustic characteristics, which ensures that the subwoofers' output is always clear and impactful. Conventional enclosures with flex-prone thin metal or plastic walls actually rob the speaker of acoustic impact by dissipating the driver's energy as cabinet vibration. A sturdy, braced wood composite enclosure doesn't waste the driver's motion as cabinet resonance. The Perfect Match Strong, clear output is only half the battle, however in order for a subwoofer to be part of an ideal speaker system, it has to blend seamlessly with the companion speaker. This is where the Alto Professional's TS318S truly excels.
All TS300-series subwoofers have a choice of six selectable DSP output modes, so the subwoofer's frequency response and crossover frequency are perfectly-matched to the speaker it's being used with. Four of these six output options match the subwoofer perfectly with Alto TS2 and TS3 full-range speakers, while the other two output options (Hi-Pass or Bypass mode) ensure a perfect match even with non-Alto full-range speakers. Precision-Engineered for Performance Our computer design techniques feature advancements such as Finite Element Analysis (FEA), which enables us to optimise the speaker's magnetic structure and maintain a tight voice coil gap for maximum sensitivity. Our voice coils themselves have extremely tight windings that ensure maximum utilisation of the input signal and our adhesives exhibit unrivalled consistency and durability under high temperature conditions for unsurpassed system reliability. TS318S features an onboard 2000-watt amplifier (1000 watts continuous) with proprietary limiting circuitry that provides electronic clip, thermal and transducer overload protection, ensuring that the system always sounds clean and clear, no matter how hard it's pushed.
Driver: 18-inch with high-temperature, long-throw voice coil. Amplifier: 1000W continuous, 2000W peak Class D power.
XLR outputs, with six discreet output modes for ideal matching with companion speaker. Extended LF switch for increased EQ control. Electronic clip, thermal and transducer overdrive protection. Rugged, mar-resistant splatter-spray finish always looks good, even with heavy use.
Designed and tuned in the USA. Output Power: 2000W peak, 1000W continuous. Transducer Low: 18 (381mm) woofer.
Frequency Response: 44Hz - 86Hz (-3dB). Frequency Range: 37 - 97Hz (-10dB). Connections: (2) XLR+1/4 (6.35mm) inputs; (2) XLR outputs; (1) IEC power cable input. External Controls: - Volume control - Signal/clip limiter with LED - DSP output mode switch with LED - Polarity-reverse switch with LED - Extended low-frequency switch with LED - Power switch with LED. Electronic Protections: Electronic clip, thermal and transducer overdrive protection.
Enclosure: Internally braced MDF cabinet; 36mm mounting pole socket on top panel. Power: - Connection: Standard IEC cable - Input Voltage: 110120, 220240VAC; 50/60Hz - Consumption: 1000W - Fuse: T10AL AC250V (110120V) or T5AL AC250V (220240V). Dimensions (H x W x D): 26.8 x 21 x 24.7 / 680 x 533 x 628mm.Weight: 86.4 lbs / 39.2kg. Get a great value pair of speaker stands with carry bag without compromising on strength or build-quality with the Gorilla Stands GSS-Kit.
This quality portable speaker stand package is perfect for mobile discos, bands, other live performers and for a host or other PA applications. Unlike similar kits, the GSS-Kit uses Gorillas own steel speaker stands rather than cheaper aluminium versions. The improved strength you get with these strong reliable stands makes then suitable for use with most active and passive PA speakers. Be careful when mounting powered speakers on cheaper stands as a lot of lesser stands will not be sufficiently robust for the extra weight of the amp which can lead to bending and buckling.Each tripod stand in the Gorilla GSS-Kit has a superior maximum loading of 50kg. Each speaker stand is completely height adjustable from 100-160cm and features tough, integrated plastic fittings. By keeping the fixtures as an integral part of the stand, setup and breakdown time is kept to a minimum and there are no loose parts than can be easily lost or left-behind when transporting from gig to gig. These Gorilla speaker stands come with a strong carry bag which is perfect for transporting them to and from gigs and helps to protect them when in transit or in storage. The bag comes with a full-length fastening which makes the stands easy to unpack and pack-up and two strong carry straps. Pair of speaker stands with bag. Strong and reliable steel construction.
Suitable for most active and passive PA speakers and has standard 35mm poles. Includes: 2 x stands, 1 x bag. GetInTheMix is a trading name of Audio Visual Commodity Ltd that, as a company, has been established for over 20 years specialising in DJ equipment, Studio equipment, musical instruments and consumer electronics. In February 2017, GetInTheMix made another move to a brand new, larger premises located on The Hythe in Colchester, Essex where we could hold even more stock at bargain prices and have dedicated departments for sales, service and product testing and more. We at Getinthemix have been trading for over 20 years and unlike most other online DJ retailers, we offer unbiased advice on any product with 100% customer service satisfaction guaranteed.How do I contact you? Yes, we would love to hear from you and always want to assist you in any way we can. If you place your order on a Friday night, Saturday or Sunday the item/items will be dispatched Monday. Scottish Highlands and certain other rural areas.
Additional carriage charges apply to some areas. At GetInTheMix we aim to be the most efficient and helpful company within our marketplace and will do everything we can to assist you. No items are supplied on a trial basis.
We aim to keep our stock levels accurate but in the event that an item is ordered that we have not in stock we will contact you straight away. The consumer shall not be entitled to a repayment in the event that:- he/she does not take reasonable care of the goods pre or post cancellation.
The consumer is responsible for the cost in returning any unwanted items. These terms and conditions do not affect your statutory rights. If you would rather write to us please use the postal address, though please understand that we can respond to emails much quicker! Chauvet CHS40 DJ Disco Lighting Padded C.. SE Electronics SE 2200A II C Cardoid Con..
Atmotech VS 400 Smoke Fog Effect Machine.. Akai MPC Touch MIDI Studio Live Control.. GPO Rydell 1950s Retro Four Wave MW LW F..
Stagg SDMP15-3 3-piece Set of Dynamic Ca.. Native Instruments Komplete 11 Select Mu.. Kam Gobo Tracer Portable Moving Head Clu..
Behringer iSTUDIO iS202 MIDI I/O USB Aud.. Join Our Exclusive Newsletter For Up To Date News, Special Offers And New Arrivals. Get in touch with us.
The item "Alto TS315 Active 1000W RMS 15 DJ Disco PA Speaker (Pair) & TS318S Subwoofer" is in sale since Wednesday, May 15, 2019. This item is in the category "Sound & Vision\Performance & DJ Equipment\Speakers & Monitors". The seller is "getinthemixuk" and is located in Colchester CO2 8LG. This item can be shipped to United Kingdom.